✉ 📲 WhatsApp

Electric Telescopic Gates

Home » Products » Telescopic Gates
Electric Telescopic Gate
Electric telescopic sliding gates are designed for perimeter security at industrial facilities, factory entrances, warehouses, and commercial properties. They use motor-driven telescopic retraction, need less side space than sliding gates, and suit widths from a few meters to large factory entrances. They integrate with remote control and access control systems.

Electric Telescopic Sliding Gate

Electric telescopic sliding gates designed for perimeter security in industrial facilities, factory entrances, warehouses, and large-scale commercial properties. Custom lengths available to match any opening width.

  • Electric motor-driven telescopic retraction
  • Custom lengths available for wide entrances
  • Durable steel construction with anti-corrosion coating
  • Compatible with remote control and access control systems
  • Smooth, quiet sliding movement
  • Low maintenance design

Electric Telescopic Gate Specifications

Opening widthTypically 6-25 m, depending on the number of sections
Gate sections (leaves)2, 3 or 4 telescopic sections
Opening heightUp to 2.5 m as standard; other heights on request
DriveMotor-driven rack and pinion; chain drive on request
Power supply220 V / 380 V three-phase or 110 V / 220 V single-phase, model dependent
Opening speedTypically 15-25 m per minute
MaterialHot-dip galvanised steel frame with powder-coated finish
Wind loadOutdoor installation; wind-load data confirmed with the engineering drawing for the site
Operating temperatureTypically -20 C to +55 C
Control and accessRemote control, card reader, face recognition, loop detector, LPR integration
InstallationFloor guide rail or track; foundation details are shown on the GA drawing
DocumentationGA drawing and packing list with the shipment; material certificates and test reports on request

Typical values for our standard telescopic gate range. The final specification is confirmed on the approved drawing for your project.

Comparing gate types before you buy? Our guide telescopic gates vs sliding gates covers space, speed and cost side by side.

Request a Quote →

Request a Quote

Related guides

Sizing and comparing telescopic gates before you approve the drawing.

🏠Home 📦Products 💡Solutions 📰Blog ✉️Contact

Applications

Electric telescopic gates are the standard choice for factory compounds, warehouses and residential communities with wide entrances. The telescoping sections extend and retract smoothly, handling widths from several meters up to large factory gates, and can be operated by remote, card or access control system.

Compared with sliding gates, telescopic gates need less installation space and suit entrances where the gate must open fully without a long slide track.

FAQ

What is the difference between telescopic and sliding gates?

A telescopic gate folds in sections like an accordion, so it needs less side space than a sliding gate that travels on a track.

What entrance widths can it cover?

Telescopic gates suit widths from a few meters to large factory entrances; the model is selected based on the opening size.

How is it operated?

By remote control, card reader, face recognition or automatic loop detection — the drive motor extends and retracts the sections.

Does it need a concrete track?

Telescopic gates typically run on a floor guide or track; foundation requirements are provided with the installation manual.

Can it integrate with access control?

Yes, the gate integrates with card systems, face recognition and vehicle detection for automated access.

What is the typical opening width of a telescopic gate?

Our telescopic gates typically cover openings from about 6 m up to 25 m using 2, 3 or 4 sections. The model is selected from the actual opening and the space available at the side of the entrance.

How many gate sections does a telescopic gate use?

Standard configurations use 2, 3 or 4 telescopic sections. More sections let a wider opening fold into a shorter parking space beside the entrance.

What drive and power supply does a telescopic gate need?

A motor-driven rack and pinion drive is standard, with chain drive on request. Power is 220 V or 380 V three-phase or 110 V or 220 V single-phase, depending on the model.